A company with several branches wants its phones to behave as one: any employee can call a colleague in another city by dialling an extension, customers reach the right branch from one number, and the head office can see and manage everything. An IP PBX makes this possible, but only if the design is clear from the beginning. This guide explains the choices.
One PBX or one per branch
There are two basic designs. In a central PBX the head office hosts one system, and the branches connect to it over the network. Management is simple, because there is one place for users, rules and reports, and calls between branches are internal. The weakness is that the branch depends on the link to the head office.
In a PBX per branch each site has its own system, and the systems are linked together. Each branch keeps working if the link fails, and local calls stay local. The cost is more equipment to manage and a more careful numbering plan.
Connecting the branches
Branches connect over a private network, a VPN across the internet, or a managed line from a provider. Voice is sensitive to delay, so the connection must be steady and voice must receive priority on the network (QoS). A device that combines a VPN router, a firewall and an IP PBX can suit a smaller branch. For example, the Grandstream GCC6020 Series is described on our site as a VPN router, firewall, IP PBX and switch in one.
A numbering plan that works
Decide the extension numbers before you install. A common pattern gives each branch a block of numbers, so that anyone can tell the branch from the extension. Leave room for growth, and keep the same rules for every site. Decide how staff dial a colleague in another branch, and whether branch numbers appear to outside callers.
Shared lines and local lines
Choose where outside calls enter and leave. A central trunk gives one place to manage and one set of rules. Local lines at each branch keep local numbers and let calls leave even if the head office link is down. Some companies use both: local numbers for each branch, and a central number for general enquiries that the PBX routes to the right place.
When the link between branches fails
Plan for failure. Decide what happens to a branch whose link to the head office breaks: does it keep making local calls, can it reach the outside, will staff lose their phones? A local PBX or a local trunk gives the branch a way to continue. Test the failover instead of assuming it works.
Provisioning and central management
Setting up each phone by hand does not scale across many sites. Choose a system that can configure phones automatically and be managed from a web page or the cloud, so a new employee at any branch can be added quickly. Keep one document of the numbering plan, the users and the trunks. See our guide to a Grandstream IP PBX and the UCM6300 Series for the range of models.
Security
A phone system that links many sites exposes more entry points. Use strong passwords, keep management away from the open internet, restrict SIP to the addresses that need it, and update firmware.
Mistakes to avoid
- Starting installations before agreeing the numbering plan.
- Depending on a single internet link for a branch that must always take calls.
- Mixing voice and other traffic without priority.
- Leaving branch phones to be set up by hand with no standard.
Frequently asked questions
Is one central PBX or one PBX per branch better?
Neither is better in every case. A central PBX is simpler to manage, while a PBX per branch keeps working if the link fails. Choose by how important each branch's continuity is.
What happens if the link to the head office fails?
It depends on the design. With only a central PBX, the branch loses its phones. A local PBX or local trunk keeps local calls running, so plan and test this.
Can branches share extension numbers?
It is better not to. Give each branch its own range so that extensions are unique across the company.
How are calls to the main number routed?
The PBX answers with an auto-attendant or ring group and sends the call to the right branch or department, based on the options you set.
Send us the list of branches and the number of staff in each with the button below, and we will recommend the design. See also our IP PBX service page.
Need help choosing the right system?
Contact us on WhatsApp and send the site type, size, and service needed.
WhatsAppService page