In an apartment building the intercom is the front desk that is always on duty. It decides who gets in, how residents see their visitors, and how deliveries reach the right door. A system chosen for a villa does not fit a building with many flats, so the planning starts from the building, not from the device.
How it works
A door station at the entrance carries a call button or a directory, a microphone, a speaker and usually a camera. When a visitor calls a flat, the call reaches the resident's indoor unit or phone. The resident talks, sees the visitor, and releases the entrance lock. In larger buildings a central unit or a software system routes the calls to the right flat.
Audio or video
Audio-only systems are simple and economical, and they still work well for small buildings. Video lets residents see who is at the door, which matters for security and for confirming deliveries. In a new building, video is usually the better choice, because it is easier to plan it from the start than to add it later.
Wired or IP
Traditional systems use dedicated cables to each flat. IP systems use the building's network cabling and can add features such as answering on a phone, sharing cameras and integrating with access cards. IP systems need a planned network with switches, and PoE makes it easier to power the door stations. Choose by how the building is cabled and who will maintain it.
Plan the entrance
Think about every entrance: the main door, the car park, the service entrance. Each needs a door station or a card reader, and the lock must fit the door and the fire rules. Place the station where the visitor can be seen clearly, out of direct glare and rain. Decide how residents enter without calling, using cards, codes or phones, and how the building manager removes access when a tenant leaves.
Deliveries and guests
Plan how couriers reach residents: a call to the flat, a time-limited code, or a delivery point. Allow residents to answer from their phone when they are out, so deliveries are not missed. Give the building manager a way to open the door for visitors who call the management office.
Individual flats
If your building already has an entrance system, the door of a single flat can still be improved. A smart peephole doorbell, such as the EZVIZ DP2C, replaces the door viewer and shows the visitor on an indoor screen. This helps where the building has no video intercom. See the full range on our intercom service page.
Maintenance
Intercom systems fail at the door station first, because it faces weather and daily use. Choose weather-resistant equipment, clean the camera, test the lock release, and keep the list of flats and residents current.
Mistakes to avoid
- Choosing the system before checking the cabling in the building.
- Placing the door station in glare or rain.
- Forgetting a way for residents to enter without a call.
- Not updating the resident list when tenants change.
Frequently asked questions
Does every flat need its own indoor monitor?
Not always. Many IP systems let residents answer from a phone, and some buildings use both an indoor unit and the app.
Can residents answer from outside the building?
Yes, with an IP system that supports phone answering. Check the app and the internet connection requirements first.
How should deliveries be handled?
Use a call to the flat, a temporary code, or a delivery point at the entrance. The building manager should choose one method for the whole building.
What happens if the power fails?
The entrance lock must follow the building's safety rules, and the system should have a backup power option. Ask the installer how the doors behave in a power cut.
Send us the number of flats and the entrance layout with the button below, and we will suggest the system.
Need help choosing the right system?
Contact us on WhatsApp and send the site type, size, and service needed.
WhatsAppService page