Updated: 2026-10-23 · Access Points

A hotel guest judges the Wi-Fi within minutes of check-in, and one weak room is enough for a bad review. Hotel Wi-Fi is not a single coverage problem. It is a set of different spaces on one network that the hotel team must be able to manage. This guide explains how to plan it in Riyadh.

Plan by space, not by building

List the spaces on the floor plan: guest rooms, corridors, lobby, restaurant, meeting and event halls, the gym, staff and back-of-house areas. Each behaves differently. A corridor has few users, while a banquet hall can fill with phones in minutes, and guest rooms are separated by walls and doors that block signal.

For every space ask how many devices will connect at the busiest time, what they will do (messaging, video calls, streaming), and what the building is made of. Heavy walls, glass and lifts change the plan more than floor area does.

Choose the access point type for each area

  • Guest rooms: an in-wall access point sits where a network socket would be, giving each room its own signal. Corridor access points can also reach rooms, but only when the walls are light.
  • Lobby, restaurant and halls: ceiling access points with enough capacity for crowds. Models such as the Grandstream GWN7662 (Wi-Fi 6) and the GWN7672 (tri-band Wi-Fi 7) are built for busier indoor sites such as hotels.
  • Small back-of-house areas or a small guesthouse: for modest demand, a model like the GWN7625 (Wi-Fi 5) may be enough.

See the full range on our Grandstream page and the access point service page.

Build the network behind the Wi-Fi

Run a data cable to every access point and power it from a PoE switch, using the IEEE 802.3 PoE standards (af, at or bt, depending on the device). This removes the need for a power outlet at each location and lets you restart a device from the switch.

Separate the traffic. Guests, staff, hotel systems and smart devices belong on different VLANs (IEEE 802.1Q), with guest isolation so one guest's device cannot see another's. Add a captive portal or vouchers if guests must accept terms, limit the speed per guest, and use WPA3 where devices support it. Keep hotel management systems off the guest network.

Roaming and interference

Guests walk from a room to the corridor to the lift during a call. Access points with fast roaming (IEEE 802.11k, 802.11v and 802.11r) hand the device over without a drop, so check that the access points and the controller support it.

In a hotel many access points compete for the same channels. Use the 5 GHz band (and 6 GHz where devices support it) for most traffic, keep transmit power moderate so the signal does not spill into neighbouring rooms, and set channels from a plan. A site survey before installation and a test walk afterwards catch most problems.

Management and support

Choose a platform with central management and alerts, so the team sees a failed access point before a guest calls the front desk. Document the cabling, the locations and the settings.

Mistakes to avoid

  • Planning by floor area and ignoring walls and room layout.
  • Putting guests, staff and hotel systems on one network.
  • Skipping the survey and finding weak rooms after opening.
  • Mounting every access point in corridors and expecting strong signal inside each room.

Frequently asked questions

How many access points does a hotel need?

It depends on the building, not on a fixed ratio. Walls, room layout and the expected number of devices decide it, which is why the site survey comes first.

Should every guest room have its own access point?

Not always. In buildings with heavy walls, an in-wall access point per room or per pair of rooms gives the most reliable signal. In lighter buildings, well-placed corridor access points may be enough.

Can guest Wi-Fi be kept separate from hotel systems?

Yes. Use separate VLANs and SSIDs with guest isolation and firewall rules.

Do we need Wi-Fi 6 or Wi-Fi 7 for a hotel?

Newer standards handle many devices at once better, which helps in lobbies and halls. For rooms with one or two devices an older standard can be enough. Decide by expected load and budget.

Send us the floor plan and the type of hotel with the button below, and we will recommend the access points and the network design.

Need help choosing the right system?

Contact us on WhatsApp and send the site type, size, and service needed.

WhatsAppService page